Riverside Epoxy Flooring Group is Riverside County's trusted expert in epoxy flooring and concrete coatings, specializing in garage floor epoxy, polyaspartic flake systems, and commercial floor coatings. We offer designer metallic epoxy and quartz broadcast floors.
Get a free floor estimate
Our team provides mechanical diamond grinding and slab moisture testing, delivering garages that shrug off hot tires for homes and seamless, slip-resistant floors for both residential and commercial projects. Backed by 12 years in business and our 2-year workmanship warranty, we've completed over 1,187 projects, from a single-car garage to phased warehouse aisles.
From routing out shrinkage cracks and grinding to a CSP 2 profile to the last clear coat and the cure-time handover, our team handles every detail. Serving Riverside and neighboring Eastvale, Norco, Woodcrest and El Sobrante, we keep the same crew on your floor from the moisture test to the day the cars come back.
What you can hold us to
Epoxy flooring in Riverside is estimated at roughly $2,800 to $6,200 for a two-car garage with a full flake polyaspartic system, and slab condition, square footage and the system you choose move the price most. The table shows the floors we quote most often, each as an estimated range.
| Floor | Est. investment | Est. time on site |
|---|---|---|
| One-car garage, solid color epoxy | Est. $1,500 to $3,600 per garage | Est. 1 to 2 days |
| Two-car garage, full flake polyaspartic | Est. $2,800 to $6,200 per garage | Est. 1 to 2 days |
| Three-car garage, full flake system | Est. $4,200 to $7,200 per garage | Est. 2 to 3 days |
| Designer metallic epoxy floor | Est. $4,500 to $12,000 per floor | Est. 3 to 4 days |
| Patio, porch or pool deck coating | Est. $1,200 to $4,000 per area | Est. 1 to 2 days |
| Commercial or multi-car facility floor | Est. $5,500 to $14,000 per section | Est. 3 to 5 days |
Old coatings add cost, because a failed DIY paint or peeling epoxy has to come off first, and that grind is typically estimated at $800 to $3,000 for a 400 to 600 sq ft floor. Riverside's median owner-occupied home value of $584,800 means most of our garage clients are coating for the long haul, which is why we price the full grind instead of a skim coat.
Every figure above is an estimate for a Riverside floor and is subject to change. Your written quote after the moisture test sets the final price and the install schedule, and it depends on the slab's condition, the square footage and the coating system you pick.
Marcus, Canyon Crest, Riverside
A box-store kit from five years earlier was peeling in both tire paths and the slab had two long shrinkage cracks
Robert, estate lot off Santiago Boulevard, Villa Park
A car collector wanted the garage to read like a gallery, not a parking space
Brian, east side near the horse trails, Yorba Linda
A three-car garage with a gym corner and hot tires coming in off the 91 every evening
Hector, logistics park on the city's edge, Eastvale
A dusting slab in a pick and pack zone that kept shedding concrete dust onto stock
Investment and duration figures are estimates. Your written quote sets the final price and schedule.
Marcus in Canyon Crest had a box-store kit peeling in both tire paths, so we ground it off, filled two long shrinkage cracks and laid a full flake system with a UV-stable clear, an estimated $3,400 to $4,600 job over an estimated 1 to 2 days.
Brian in Yorba Linda brings hot tires in off the 91 every evening, so his 720 sq ft three-car garage got a polyurea basecoat, domino flake and a two-coat clear, roughly $4,800 to $6,900 and an estimated 2 to 3 days.
Hector's pick and pack zone in an Eastvale logistics park was shedding concrete dust onto stock, so we coated 3,600 sq ft of high-build epoxy with safety-yellow striping in two sections, an estimated $14,000 to $24,000 project.
Robert's 760 sq ft showcase garage off Santiago Boulevard in Villa Park now carries a charcoal and silver designer metallic epoxy, typically $8,500 to $11,800 for a floor of that size.
See every case study, with its estimated numbers, on our epoxy floor projects page.
Slide across. The concrete stayed; the floor changed.
BeforeAfter
BeforeAfter
BeforeAfter
BeforeAfter
BeforeAfter
BeforeAfterPolyaspartic is the topcoat most Riverside garages need, because plain epoxy ambers where sun reaches it and softens under hot tires. The table compares the systems we install by return-to-service time and best use.
| System | Est. park-on or return time | Best for |
|---|---|---|
| 100% solids epoxy base | Est. 72 to 96 hours before cars | Thick build under flake, shops, interiors |
| Aliphatic polyaspartic | Est. 24 to 36 hours before cars | Sunny garages, one-day installs, patios |
| Epoxy-quartz broadcast | Est. 2 to 3 days to install | Wet laundries, kitchens, slip-prone rooms |
| Designer metallic epoxy | Est. 3 to 4 days to install | Showcase garages and living spaces |
Compare the options on our pages for garage floor epoxy, polyaspartic garage floors, quartz broadcast floors and metallic epoxy floors.
A peeling garage floor is almost always a prep failure, not a product failure. Box-store kits rely on acid etching, which opens the slab unevenly and leaves sealers and oil in place, so the coat lets go the first summer a hot tire sits on it. That is exactly what we ground off Marcus's Canyon Crest garage. Thin water-based kits also build only a few mils, while our multi-coat flake systems run 15 to 35 mils dry. South Coast AQMD Rule 1113 caps VOCs in floor coatings, and our systems sit at 0 to 50 g/L, so you are not breathing solvent for days.
Homeowners, association boards and facility managers each get their own path, with the same moisture test and grind underneath. A homeowner gets a written estimate and a cure schedule. A board gets a phased plan and resident notices, as Jennifer's Eastvale Square garage block did, done in two phases at an estimated $13,000 to $24,000. A plant or warehouse manager gets a bid by zone, and our commercial epoxy flooring team phases around shifts the way we did for Victor's Riverside assembly floor near the Santa Ana River.
Our owner still reads every moisture test and walks each slab before a system is chosen. The same crew that grinds your floor coats it, our lead installer times every flake broadcast before the resin skins over, and our 2-year workmanship warranty covers peeling, delamination and hot-tire pickup. The coating makers' product warranties, typically 5 to 10 years on professionally installed systems, pass through to you in writing. Meet the team behind every floor, from our estimator to our surface prep technician.
We coat floors across a 45-mile radius, from the Wood Streets and Canyon Crest to Eastvale garage floors, Norco barns and garages, Yorba Linda three-car garages and Claremont bungalow slabs, plus Villa Park, North Tustin, Woodcrest, El Sobrante, Diamond Bar and San Antonio Heights on our full service area list.
Riverside homeowners often pair a floor with our garage makeover packages or a patio and pool deck coating, ranch owners book shop and barn floor coatings, and facility buyers start with warehouse floor coatings.
Request a free estimate, and we will test your slab, walk you through flake and color options and send a written, itemized quote.
Start to finish
We walk the slab with you, map cracks, joints and old coatings, and take moisture readings before a system is named.
The system, every coat and its thickness, the colors and the cure and return-to-service times arrive in writing.
The slab is diamond ground with dust control, cracks and joints are filled, and each coat goes down inside its recoat window.
We walk the cured floor with you, go over the care notes and tell you when cars or equipment can come back.
Call today for a free estimate, and we will test your slab for moisture before we recommend a single coat.
Meet the team
Names, photos and stories are on our about page.
Owner
Riverside location manager
Yorba Linda location manager
Claremont location manager
Lead Installer
Surface Prep Technician
Estimator and Project Coordinator
Where we work
A two-car Riverside garage with a full flake polyaspartic system is estimated at roughly $2,800 to $6,200, and your written quote sets the final price after the moisture test.
Most polyaspartic floors take an estimated 24 to 36 hours before you park, while 100% solids epoxy typically needs 72 to 96 hours.
No, our floors are ground to a CSP 2 to CSP 3 profile and rated for tire heat from 140°F to 180°F, which is why Brian's Yorba Linda garage shows no tire marks after a summer.
No, every floor gets a UV-stable aliphatic polyaspartic clear coat, which stays clear where plain epoxy ambers.
Yes, we rout and fill the cracks and grind the whole floor flat, as we did on Kevin's game room slab in The Country Estates of Diamond Bar.
We take a deposit of no more than 10% or $1,000, whichever is less, under the California home improvement deposit cap.
Yes, we phase warehouses, plants, dental suites and association garage blocks so the building keeps running.
Every floor carries our 2-year workmanship warranty against peeling, delamination and hot-tire pickup, plus the coating maker's product warranty.
Call us or send the form, and we will book a free moisture test and a written estimate.
Calls only, we do not receive text messages.
